2024 Realistic NSE4_FGT-7.0 Dumps Exam Tips Test Pdf Exam Material
Powerful NSE4_FGT-7.0 PDF Dumps for NSE4_FGT-7.0 Questions
NEW QUESTION # 23
Refer to the exhibit showing a debug flow output.
Which two statements about the debug flow output are correct? (Choose two.)
- A. The default route is required to receive a reply.
- B. A new traffic session is created.
- C. The debug flow is of ICMP traffic.
- D. A firewall policy allowed the connection.
Answer: B,C
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.3/cookbook/54688/debugging-the-packet-flow
NEW QUESTION # 24
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 fails to come up. The administrator has also re-entered the pre-shared key on both FortiGate devices to make sure they match.
Based on the phase 1 configuration and the diagram shown in the exhibit, which two configuration changes will bring phase 1 up? (Choose two.)
- A. On both FortiGate devices, set
- B. On HQ-FortiGate, disable Diffie-Helman group 2
- C. On HQ-FortiGate, set IKE mode to
- D. On Remote-FortiGate, set port2
Answer: C,D
Explanation:
Explanation
FortiGate Infrastructure 7.0 Study Guide p. 222 FortiGate Infrastructure 7.0 Study Guide p. 208
NEW QUESTION # 25
Which CLI command allows administrators to troubleshoot Layer 2 issues, such as an IP address conflict?
- A. get system arp
- B. get system performance status
- C. get system status
- D. diagnose sys top
Answer: A
Explanation:
Explanation
"If you suspect that there is an IP address conflict, or that an IP has been assigned to the wrong device, you may need to look at the ARP table."
NEW QUESTION # 26
An administrator has a requirement to keep an application session from timing out on port 80. What two changes can the administrator make to resolve the issue without affecting any existing services running through FortiGate? (Choose two.)
- A. Create a new firewall policy with the new HTTP service and place it above the existing HTTP policy.
- B. Create a new service object for HTTP service and set the session TTL to never
- C. Set the TTL value to never under config system-ttl
- D. Set the session TTL on the HTTP policy to maximum
Answer: A,B
Explanation:
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Session-timeout-settings/ta-p/191228
NEW QUESTION # 27
Refer to the exhibit.
Which contains a Performance SLA configuration.
An administrator has configured a performance SLA on FortiGate. Which failed to generate any traffic. Why is FortiGate not generating any traffic for the performance SLA?
- A. You need to turn on the Enable probe packets switch.
- B. There may not be a static route to route the performance SLA traffic.
- C. The Ping protocol is not supported for the public servers that are configured.
- D. Participants configured are not SD-WAN members.
Answer: A
Explanation:
Reference:
https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/478384/performance-sla-linkmonitoring
NEW QUESTION # 28
Which security feature does FortiGate provide to protect servers located in the internal networks from attacks such as SQL injections?
- A. Web application firewall
- B. Application control
- C. Antivirus
- D. Denial of Service
Answer: A
NEW QUESTION # 29
Refer to the exhibit.
Based on the administrator profile settings, what permissions must the administrator set to run the diagnose firewall auth list CLI command on FortiGate?
- A. Read/Write permission for Firewall
- B. CLI diagnostics commands permission
- C. Read/Write permission for Log & Report
- D. Custom permission for Network
Answer: B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD50220
NEW QUESTION # 30
Refer to the exhibit.
Review the Intrusion Prevention System (IPS) profile signature settings. Which statement is correct in adding the FTP.Login.Failed signature to the IPS sensor profile?
- A. Traffic matching the signature will be silently dropped and logged.
- B. The signature setting uses a custom rating threshold.
- C. The signature setting includes a group of other signatures.
- D. Traffic matching the signature will be allowed and logged.
Answer: A
Explanation:
Action is drop, signature default action is listed only in the signature, it would only match if action was set to default.
NEW QUESTION # 31
A network administrator is configuring a new IPsec VPN tunnel on FortiGate. The remote peer IP address is dynamic. In addition, the remote peer does not support a dynamic DNS update service.
What type of remote gateway should the administrator configure on FortiGate for the new IPsec VPN tunnel to work?
- A. Static IP Address
- B. Dialup User
- C. Dynamic DNS
- D. Pre-shared Key
Answer: B
Explanation:
Explanation
Dialup user is used when the remote peer's IP address is unknown. The remote peer whose IP address is unknown acts as the dialup clien and this is often the case for branch offices and mobile VPN clients that use dynamic IP address and no dynamic DNS
NEW QUESTION # 32
Which two protocol options are available on the CLI but not on the GUI when configuring an SD-WAN Performance SLA? (Choose two.)
- A. DNS
- B. ping
- C. udp-echo
- D. TWAMP
Answer: C,D
NEW QUESTION # 33
FortiGuard categories can be overridden and defined in different categories. To create a web rating override for example.com home page, the override must be configured using a specific syntax.
Which two syntaxes are correct to configure web rating for the home page? (Choose two.)
- A. www.example.com
- B. example.com
- C. www.example.com/index.html
- D. www.example.com:443
Answer: A,B
Explanation:
Explanation
FortiGate_Security_6.4 page 384
When using FortiGuard category filtering to allow or block access to a website, one option is to make a web rating override and define the website in a different category. Web ratings are only for host names- "no URLs or wildcard characters are allowed".
NEW QUESTION # 34
Which feature in the Security Fabric takes one or more actions based on event triggers?
- A. Logical Topology
- B. Security Rating
- C. Fabric Connectors
- D. Automation Stitches
Answer: D
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.2.0/cookbook/286973/fortinet-security-fabric
NEW QUESTION # 35
When a firewall policy is created, which attribute is added to the policy to support recording logs to a FortiAnalyzer or a FortiManager and improves functionality when a FortiGate is integrated with these devices?
- A. Log ID
- B. Sequence ID
- C. Universally Unique Identifier
- D. Policy ID
Answer: C
Explanation:
Reference: https://docs.fortinet.com/document/fortigate/6.0.0/handbook/554066/firewall-policies
"Universally Unique Identifier (UUID) attributes have been added to policies to improve functionality when working with FortiManager or FortiAnalyzer units"
NEW QUESTION # 36
Examine this FortiGate configuration:
Examine the output of the following debug command:
Based on the diagnostic outputs above, how is the FortiGate handling the traffic for new sessions that require inspection?
- A. It is allowed, but with no inspection
- B. It is allowed and inspected as long as the inspection is flow based
- C. It is allowed and inspected, as long as the only inspection required is antivirus.
- D. It is dropped.
Answer: D
NEW QUESTION # 37
Examine the exhibit, which contains a virtual IP and firewall policy configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address
10.0.1.254/24.
The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24?
- A. 10.0.1.254
- B. Any available IP address in the WAN (port1) subnet 10.200.1.0/24
- C. 10.200.1.1
- D. 10.200.1.10
Answer: D
Explanation:
Explanation
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Virtual%20IPs.
NEW QUESTION # 38
Which three security features require the intrusion prevention system (IPS) engine to function? (Choose three.)
- A. Application control
- B. Web application firewall
- C. Antivirus in flow-based inspection
- D. Web filter in flow-based inspection
- E. DNS filter
Answer: A,C,D
NEW QUESTION # 39
Refer to the exhibit.
The exhibit shows proxy policies and proxy addresses, the authentication rule and authentication scheme, users, and firewall address.
An explicit web proxy is configured for subnet range 10.0.1.0/24 with three explicit web proxy policies.
The authentication rule is configured to authenticate HTTP requests for subnet range 10.0.1.0/24 with a form-based authentication scheme for the FortiGate local user database. Users will be prompted for authentication.
How will FortiGate process the traffic when the HTTP request comes from a machine with the source IP
10.0.1.10 to the destination http://www.fortinet.com? (Choose two.)
- A. If a Mozilla Firefox browser is used with User-B credentials, the HTTP request will be allowed.
- B. If a Microsoft Internet Explorer browser is used with User-B credentials, the HTTP request will be allowed.
- C. If a Google Chrome browser is used with User-B credentials, the HTTP request will be allowed.
- D. If a Mozilla Firefox browser is used with User-A credentials, the HTTP request will be allowed.
Answer: B,C
NEW QUESTION # 40
What is the primary FortiGate election process when the HA override setting is disabled?
- A. Connected monitored ports > System uptime > Priority > FortiGate Serial number
- B. Connected monitored ports > HA uptime > Priority > FortiGate Serial number
- C. Connected monitored ports > Priority > HA uptime > FortiGate Serial number
- D. Connected monitored ports > Priority > System uptime > FortiGate Serial number
Answer: B
Explanation:
Reference: http://myitmicroblog.blogspot.com/2018/11/what-should-you-know-about-ha-override.html FortiGate_Infrastructure_7.0 page 304 PUPS - Ports/Uptime/Priority/Serial
NEW QUESTION # 41
......
Fortinet NSE4_FGT-7.0 certification exam covers a broad range of security technologies such as firewall, VPN, web filtering, application control, intrusion prevention, endpoint security, and more. NSE4_FGT-7.0 exam is designed to test the candidate's knowledge and skills in configuring and managing Fortinet security solutions as well as troubleshooting and optimization of network security.
Guaranteed Accomplishment with Newest Feb-2024 FREE: https://examcollection.guidetorrent.com/NSE4_FGT-7.0-dumps-questions.html