2023 Correct and Up-to-date Fortinet NSE7_EFW-7.0 BrainDumps
Current NSE7_EFW-7.0 dumps Preparation through Our Practice Test
NEW QUESTION # 73
View the exhibit, which contains the output of a diagnose command, and the answer the question below.
Which statements are true regarding the Weight value?
- A. It determines which FortiGuard server is used for license validation.
- B. Its initial value is statically set to 10.
- C. Its value is incremented with each packet lost.
- D. Its initial value is calculated based on the round trip delay (RTT).
Answer: C
NEW QUESTION # 74
View the exhibit, which contains the output of get sys ha status, and then answer the question below.
Which statements are correct regarding the output? (Choose two.)
- A. The slave configuration is not synchronized with the master.
- B. port 7 is used the HA heartbeat on all devices in the cluster.
- C. Master is selected because it is the only device in the cluster.
- D. The HA management IP is 169.254.0.2.
Answer: A,B
NEW QUESTION # 75
Examine the partial output from the IKE real time debug shown in the exhibit; then answer the question below.
Why didn't the tunnel come up?
- A. The remote gateway's Phase-1 configuration does not match the local gateway's phase-1 configuration.
- B. One IPsec gateway is using main mode, while the other IPsec gateway is using aggressive mode.
- C. The remote gateway's Phase-2 configuration does not match the local gateway's phase-2 configuration.
- D. IKE mode configuration is not enabled in the remote IPsec gateway.
Answer: A
NEW QUESTION # 76
A FortiGate has two default routes:
All Internet traffic is currently using port1. The exhibit shows partial information for one sample session of Internet traffic from an internal user:
What would happen with the traffic matching the above session if the priority on the first default route (IDd1) were changed from 5 to 20?
- A. The session would remain in the session table, and its traffic would start to egress from port2.
- B. The session would be deleted, and the client would need to start a new session.
- C. The session would remain in the session table, and its traffic would still egress from port1.
- D. The session would remain in the session table, but its traffic would now egress from both port1 and port2.
Answer: C
NEW QUESTION # 77
In which two ways does FortiManager function when it is deployed as a local FDS? (Choose two.)
- A. It supports rating requests from non-FortiGate devices.
- B. It provides VM license validation services.
- C. It can be configured as an update server, a rating server, or both.
- D. It caches available firmware updates for unmanaged devices.
Answer: B,C
NEW QUESTION # 78
Refer to the exhibit, which shows a partial routing table.
Assuming all the appropriate firewall policies are configured, which two pings will FortiGate route? (Choose two.)
- A. Source IPaddress: 10.72.3.52. Destination IP address: 10.1.0.254
- B. Source IPaddress: 10.10.4.24, Destination IPaddress: 10.72.3.20
- C. Source IP address: 10.1.0.10. Destination IP address: 10.64.1.52
- D. Source IPaddress: 10.73.9.10, Destination IPaddress: 10.72.3.15
Answer: A,C
NEW QUESTION # 79
When using the SSL certificate inspection method for HTTPS traffic, how does FortiGate filter web requests when the browser client does not provide the server name indication (SNI) extension?
- A. FortiGate uses CN information from the Subject field in the server's certificate.
- B. FortiGate uses the requested URL from the user's web browser.
- C. FortiGate blocks the request without any further inspection.
- D. FortiGate switches to the full SSL inspection method to decrypt the data.
Answer: A
NEW QUESTION # 80
How are bulk configuration changes made using FortiManager CLI scripts? (Choose two.)
- A. When run on the All FortiGate in ADOM, changes are automatically installed without the creation of a new revision history.
- B. When run on the Device Database, changes are applied directly to the managed FortiGate device.
- C. When run on the Policy Package, ADOM database, you must use the installation wizard to apply the changes to the managed FortiGate device
- D. When run on the Remote FortiGate directly, administrators do not have the option to review the changes prior to installation.
Answer: C,D
Explanation:
CLI scripts can be run in three different ways: Device Database: By default, a script is executed on the device database. It is recommend you run the changes on the device database (default setting), as this allows you to check what configuration changes you will send to the managed device. Once scripts are run on the device database, you can install these changes to a managed device using the installation wizard.
Policy Package, ADOM database: If a script contains changes related to ADOM level objects and policies, you can change the default selection to run on Policy Package, ADOM database and can then be installed using the installation wizard.
Remote FortiGate directly (through CLI): A script can be executed directly on the device and you don't need to install these changes using the installation wizard. As the changes are directly installed on the managed device, no option is provided to verify and check the configuration changes through FortiManager prior to executing it.
NEW QUESTION # 81
A corporate network allows Internet Access to FSSO users only. The FSSO user student does not have Internet access after successfully logged into the Windows AD network. The output of the 'diagnose debug authd fsso list' command does not show student as an active FSSO user. Other FSSO users can access the Internet without problems .
What should the administrator check? (Choose two.)
- A. The user student must not be listed in the CA's ignore user list.
- B. The user student must belong to one or more of the monitored user groups.
- C. At least one of the student's user groups must be allowed by a FortiGate firewall policy.
- D. The student workstation's IP subnet must be listed in the CA's trusted list.
Answer: A,B
NEW QUESTION # 82
View the exhibit, which contains the output of diagnose sys session stat, and then answer the question below.
Which statements are correct regarding the output shown? (Choose two.)
- A. There are 0 ephemeral sessions.
- B. No sessions have been deleted because of memory pages exhaustion.
- C. There are 166 TCP sessions waiting to complete the three-way handshake.
- D. All the sessions in the session table are TCP sessions.
Answer: A,B
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=FD40578
NEW QUESTION # 83
View the central management configuration shown in the exhibit, and then answer the question below.
Which server will FortiGate choose for antivirus and IPS updates if 10.0.1.243 is experiencing an outage?
- A. 10.0.1.240
- B. 10.0.1.242
- C. One of the public FortiGuard distribution servers
- D. 10.0.1.244
Answer: C
NEW QUESTION # 84
In which two states is a given session categorized as ephemeral? (Choose two.)
- A. A UDP session with only one packet received.
- B. A TCP session waiting to complete the three-way handshake.
- C. A UDP session with packets sent and received.
- D. A TCP session waiting for FIN ACK.
Answer: A,D
NEW QUESTION # 85
View the exhibit, which contains a partial routing table, and then answer the question below.
Assuming all the appropriate firewall policies are configured, which of the following pings will FortiGate route? (Choose two.)
- A. Source IP address 10.1.0.24, Destination IP address 10.72.3.20.
- B. Source IP address 10.72.3.52, Destination IP address 10.1.0.254.
- C. Source IP address 10.72.3.27, Destination IP address 10.1.0.52.
- D. Source IP address 10.73.9.10, Destination IP address 10.72.3.15.
Answer: B,C
NEW QUESTION # 86
Refer to the exhibit, which contains partial outputs from two routing debug commands.
Why is the port2 default route not in the second command's output?
- A. It has a higher priority value than the default route using port1.
- B. It has a lower priority value than the default route using port1.
- C. It has a higher distance than the default route using port1.
- D. It is disabled in the FortiGate configuration.
Answer: C
NEW QUESTION # 87
View these partial outputs from two routing debug commands:
Which outbound interface will FortiGate use to route web traffic from internal users to the Internet?
- A. Both port1 and port2
- B. port1
- C. port3
- D. port2
Answer: B
NEW QUESTION # 88
Which statement about the designated router (DR) and backup designated router (BDR) in an OSPF multi-access network is true?
- A. Non-DR and non-BDR routers will form full adjacencies to DR and BDR only.
- B. FortiGate first checks the OSPF ID to elect a DR.
- C. BDR is responsible for forwarding link state information from one router to another.
- D. Only the DR receives link state information from non-DR routers.
Answer: A
NEW QUESTION # 89
Examine the output of the 'get router info ospf interface' command shown in the exhibit; then answer the question below.
Which statements are true regarding the above output? (Choose two.)
- A. The port4 interface is connected to the OSPF backbone area.
- B. There are at least 5 OSPF routers connected to the port4 network.
- C. The local FortiGate has been elected as the OSPF backup designated router.
- D. Two OSPF routers are down in the port4 network.
Answer: A,B
NEW QUESTION # 90
View the exhibit, which contains the partial output of an IKE real time debug, and then answer the question below.
The administrator does not have access to the remote gateway.
Based on the debug output, what configuration changes can the administrator make to the local gateway to resolve the phase 1 negotiation error?
- A. Change phase 1 encryption to 3DES and authentication to CBC.
- B. Change phase 1 encryption to AESCBC and authentication to SHA128.
- C. Change phase 1 encryption to 3DES and authentication to SHA256.
- D. Change phase 1 encryption to AES128 and authentication to SHA512.
Answer: A
NEW QUESTION # 91
......
100% Reliable Microsoft NSE7_EFW-7.0 Exam Dumps Test Pdf Exam Material: https://examcollection.guidetorrent.com/NSE7_EFW-7.0-dumps-questions.html