Paper on the desk, phone in your pocket, PC at home — the GuideTorrent HQT-4160 package comes in PDF, software, and online modes, and you can switch between them freely. Downloads are unlimited, simultaneous use is unrestricted, and the same 57 practice questions for the Hitachi Vantara Qualified Professional - VSP 5000 Series Installation stay with you on every device.
Hitachi HQT-4160 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: System Architecture | - VSP 5000 Models and Specifications - Back-end Design and Disk Adapters (DKA) - System Architecture and Components - Front-end Design and Channel Boards (CHB) |
| Topic 2: System Pre-Installation and Installation | - Network Settings Configuration - Microcode Upgrade Procedures - New Installation Procedures - Pre-installation Procedures and Documentation - Disk Controller (DKC) Interconnections |
What to Know About the Hitachi Vantara Qualified Professional - VSP 5000 Series Installation Before You Start
Registration for the Hitachi Vantara Qualified Professional - VSP 5000 Series Installation goes through the official channels listed here:
One detail worth knowing before you book: the HQT-4160 exam is delivered Proctored online or onsite (Kryterion Webassessor / authorized delivery systems).
Yes — the free trial exists so customers can fully understand the system before buying. Download the sample HQT-4160 practice questions at no cost, explore the interface, and check the verified answers yourself. Once you purchase, 365 days of free updates are included, and if the product expires, the update service renews at a 50% discount from your member zone.
The Hitachi Vantara Qualified Professional - VSP 5000 Series Installation blueprint is organized into 2 domains, led by System Pre-Installation and Installation, System Architecture. The complete weighted syllabus appears above on this page — it is the checklist your preparation should be measured against.
You will face 35 questions within 60 minutes on the HQT-4160 exam. The real exam pressure comes from that ratio — knowledge alone does not finish exams on time. Rehearse with the GuideTorrent test engine's timed mode, repeat the same question sets until the answers consolidate, and pacing stops being a risk factor.
Recommended experience with storage systems installation and familiarity with Hitachi Vantara storage platforms; completion of official training (e.g., Installing and Configuring Hitachi VSP 5000 Series 1090PI) is recommended.
Eligibility rules do get revised, so before booking, verify the current requirements on the official Hitachi exam page.
Delivery takes effect immediately: download right after payment, with an email copy arriving within one minute. If 2 hours pass with no email, check spam and contact customer service — professional staff can remotely guide installation and use if needed. Downloads and simultaneous use are not limited, so every device you own can carry the material.
If you sit the HQT-4160 exam within 60 days of purchase and do not pass, the GuideTorrent money back guarantee covers you: file within 2 days of the exam with a scanned enrollment slip and the official score report (PDF), and the claim is processed within 7 days. The candidate name must match the payer name; the policy excludes exams taken within 3 days of purchase, purchases never used in an actual exam attempt, free materials, and expired orders. If you prefer to keep preparing, exchange the product for two free exam packages of equal value and retain the update service on your original purchase.
Hitachi lists these training resources for the Hitachi Vantara Qualified Professional - VSP 5000 Series Installation:
Courses build the framework; repeated practice consolidates it. Pair whichever resource you choose with 57 practice questions from GuideTorrent and important knowledge points stay learned, not just seen.
The HQT-4160 exam — full title Hitachi Vantara Qualified Professional - VSP 5000 Series Installation — is Hitachi's own certification test, and passing it awards the Hitachi Vantara Qualified Professional – VSP 5000 Series Installation certification at the Professional level. The certificate is valuable precisely because it is demanding: it proves to employers that your skills survived a vendor-built examination. It also serves as a stepping stone toward Hitachi Vantara Qualified Professional.
The passing score is 65%, and the official registration fee is USD 100 (varies by region). Note that the fee pays for a single attempt — a retake is charged at full price again, which is the expensive way to discover weak spots. The cheaper discovery method is self-testing: drill 57 practice questions at GuideTorrent in timed mode until your scores clear the passing mark with room to spare, then register.
Hitachi Vantara Qualified Professional - VSP 5000 Series Installation Sample Questions:
Which three Channel Board (CHB) protocols are supported on a VSP 5000 system? (Choose three.)
- A. Wide SCSI
- B. SCSI
- C. FC
- D. iSCSI
- E. FICON
Correct Answer: C,D,E 🗳️
Explanation: Only visible for GuideTorrent members. You can sign-up / login (it's free).
When a hot spare drive is activated in a VSP 5000 system, it's important to:
- A. Immediately order a replacement for the hot spare
- B. Reconfigure the RAID settings
- C. Perform a full backup of the system
- D. Power down the system to avoid data loss
Correct Answer: A 🗳️
Explanation: Only visible for GuideTorrent members. You can sign-up / login (it's free).
You need to upgrade the cache of a VSP 5500 online. How do you accomplish this task?
- A. Use the Maintenance Utility to block the controllers one at the time, and add the extra cache to the blocked controller.
- B. Use the Web Console to block the controllers one at the time, and add the extra cache to the blocked controller.
- C. Use Storage Navigator to put the CHB Adapters offline one controller at a time, and add the extra cache to the inactive controller.
- D. Use the VSP GUI and click on Change Configuration and follow the instructions on the screen to add the extra cache.
Correct Answer: A 🗳️
Explanation: Only visible for GuideTorrent members. You can sign-up / login (it's free).
Which two statements are correct regarding the "New Installation" procedure on a VSP 5000 system? (Choose two.)
- A. A customer can make a request to Hitachi Vantara Technical Support for a "New Installation" procedure, if they want to reinitialize a system entirely so all former data will be erased.
- B. Hitachi Vantara recommends not to perform the "New Installation" procedure on second-hand systems.
- C. Customer Engineers (CEs) should always perform the "New Installation" procedure when a new unit arrives at customer site.
- D. You can perform the "New Installation" procedure if a newly installed system does not power on and the Hitachi Vantara Technical Support instructs you to do so.
Correct Answer: A,B 🗳️
Explanation: Only visible for GuideTorrent members. You can sign-up / login (it's free).
How does the management software improve the operation of VSP 5000 systems?
- A. By reducing physical maintenance needs
- B. By increasing the energy consumption
- C. By automating routine tasks
- D. By simplifying user access controls
Correct Answer: C 🗳️
Explanation: Only visible for GuideTorrent members. You can sign-up / login (it's free).
Viewing page 1 out of 12 pages.
Viewing questions 1-5 out of 57 questions.


