Feb-2023 VMware 2V0-41.20 Actual Questions and Braindumps 2V0-41.20 Dumps To Pass VMware Exam in 24 Hours - GuideTorrent NEW QUESTION 34 Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.) A. 0 B. 1 C. 2 D. 3 E. 4 Answer: A,C Explanation:The NSX Manager management plane communicates with the transport nodes by using [...]

Feb-2023 VMware 2V0-41.20 Actual Questions and Braindumps [Q34-Q53]

Share

Feb-2023 VMware 2V0-41.20 Actual Questions and Braindumps

2V0-41.20 Dumps To Pass VMware Exam in 24 Hours - GuideTorrent

NEW QUESTION 34
Which two ports are used by a transport node to communicate with the management and control planes in NSX-T Data Center 3.0? (Choose two.)

  • A. 0
  • B. 1
  • C. 2
  • D. 3
  • E. 4

Answer: A,C

Explanation:
The NSX Manager management plane communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1234. CCP communicates with the transport nodes by using APH Server over NSX-RPC/TCP through port 1235. Taken from NSX-T ICM 3.0 Lecture manual

 

NEW QUESTION 35
An NSX administrator has configured a load balancer virtual server on a Tier-1 Gateway.
In order to advertise the load balancer virtual IP to the Tier-0 Gateway, which route advertisement configuration has to be done on the Tier-1 Gateway? (Choose two.)

  • A. Advertise All LB VIP Routes
  • B. Advertise All NAT Routes
  • C. Information
  • D. Advertise All LB SNAT IP Routes
  • E. All Static Routes

Answer: A,D

Explanation:
Reference:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-EEBA627A-0860-477A-95A7-7645BA562D62.html

 

NEW QUESTION 36
Which CLI command does an NSX administrator run on the NSX Manager to generate support bundle logs if the NSX UI is inaccessible?

  • A. vm-support
  • B. get support-bundle file vcpnv.tgz
  • C. set support-bundle file vcpnv.tgz
  • D. esxcli system syslog config logger set --id=nsxmanager

Answer: A

 

NEW QUESTION 37
How is the intra-tier transit link connection created between SR and DR for a Tier-0 Gateway?

  • A. Manually create external uplink interface and mark it as transit.
    Reference: https://blogs.vmware.com/networkvirtualization/2018/01/nsx-t-routing-part-2.html/
  • B. Automatically created when SR is initialized.
  • C. Manually create a gateway interface and mark it as transit.
  • D. Automatically created when DR is created.

Answer: B

 

NEW QUESTION 38
Which CLI command shows syslog on NSX Manager?

  • A. get log-file auth.log
  • B. show log manager follow
  • C. get log-file syslog
  • D. /var/log/sysloq/syslog.log

Answer: C

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-406AF9C3-E8F7-447A-8E3D-92AFB9D5E973.html

 

NEW QUESTION 39
When deploying east-west network introspection, which Service Virtual Machine (SVM) deployment method achieves the least amount of traffic hair pinning?

  • A. Create a secondary vNIC on each quest VM for SVM communication.
  • B. Add partner SVMs to an edge cluster.
    "For SVMs deployed on compute hosts, an SVM does not need to be installed on every host. Some customers prefer to deploy the partner SVM on each host to achieve the least amount of traffic hairpinning. When the partner SVM is deployed in a service cluster, traffic is sent from the compute hosts across the overlay to the hosts in the service cluster."
  • C. Centralize partner SVMs in a service cluster.
  • D. Place a partner SVM on each compute cluster node.

Answer: D

 

NEW QUESTION 40
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A. FABRIC
  • B. SYSTEM
  • C. GROUPING
  • D. MONITORING

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

 

NEW QUESTION 41
Which two statements are true about the implementation of multicast in NSX-T Data Center? (Choose two.)

  • A. An Edge can be the Rendezvous Point.
    https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf
  • B. Tier-0 gateways can be the Rendezvous Point.
  • C. Multicast is supported in ESXi and KVM transport nodes.
  • D. Multicast routing is implemented with PIM Sparse-Mode.
  • E. IGMP Snooping is used to populate multicast forwarding tables.

Answer: D,E

 

NEW QUESTION 42
An NSX administrator is planning to deploy a multi-tier routing topology in their NSX-T Data Center environment to provide north-south connectivity for the VMs.
Which routing component must be deployed?

  • A. Tier-0 Gateway
  • B. Layer 2 Gateway
  • C. Tier-1 Gateway
  • D. Edge Services Gateway

Answer: A

 

NEW QUESTION 43
Which component does the hyperbus interface (vmk50) provide network connectivity to?

  • A. containers running on ESXi/KVM transport nodes
  • B. virtual machines and containers running across transport nodes
  • C. virtual machines running in the same segment
  • D. virtual machines running on the same hypervisor

Answer: A

 

NEW QUESTION 44
Which to steps must an NSX administrator take to integrate VMware Identity Manager in NSX-T to support role-based access control? (Choose two.)

  • A. Create an OAuth 2.0 client in VMware Identity Manager.
  • B. Enter the service URL, Client Secret, and SSL thumbprint in NSX Manager.
  • C. Create a SAML authentication in VMware Identity Manager using the NSX Manager FQDN.
  • D. Enter the Identity Provider (IdP) metadata URL in NSX Manager.
  • E. Add NSX Manager as a Service Provider (SP) in VMware Identity Manager.

Answer: A,B

 

NEW QUESTION 45
Which tool could be used to inspect the path of a packet in the data plane?

  • A. Port Mirroring Session
  • B. Traceflow
  • C. Netflow
  • D. Port Connection

Answer: B

 

NEW QUESTION 46
An NSX administrator would like to export syslog events that capture messages related to NSX host preparation events.
Which message ID (msgid) should be used in the syslog export configuration command as a filter?

  • A. FABRIC
  • B. SYSTEM
  • C. GROUPING
  • D. MONITORING

Answer: A

Explanation:
Explanation
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

 

NEW QUESTION 47
Which CLI command should be executed on a KVM hypervisor to retrieve the VM interface UUID?

  • A. virsh dumpxml <VM Name> | grep interfaceid
  • B. virsh get-interface <VM Name>
  • C. virsh list-interface <VM Name>
  • D. virsh show <VM Name> | grep interfaceid

Answer: A

Explanation:
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/nsxt_30_admin.pdf

 

NEW QUESTION 48
Where are Distributed Firewall logs containing access decisions stored?

  • A. NSX Manager
  • B. Hypervisor transport node
  • C. NSX API
  • D. NSX Edge

Answer: B

Explanation:
https://docs.vmware.com/en/VMware-NSX-Data-Center-for-vSphere/6.4/com.vmware.nsx.logging.doc/GUID-6F9DC53E-222D-464B-8613-AB2D517CE5E3.html
https://docs.vmware.com/en/VMware-NSX-T-Data-Center/3.0/administration/GUID-D57429A1-A0A9-42BE-A299-0C3C3546ABF3.html

 

NEW QUESTION 49
An NSX administrator has deployed an NSX Edge on a bare-metal server.
Which command registers the NSX Edge with the NSX Manager?

  • A. join cluster <nsx-cluster-IP> username root password <root-password> thumbprint
    <nsx-manager-thumbprint>
  • B. join management-plane <nsx-nanager-ip> username admin password <admin-password> thumbprint <nsx-manager-thumbprint>
  • C. join policy-manager <nsx-manager-ip> username root password <root-password> thumbprint <nsx-manager-thumbprint>
  • D. join management-cluster <nsx-cluster-IP> username admin password <admin- password> thumbprint <nsx-manager-thumbprint>

Answer: B

 

NEW QUESTION 50
A company is deploying a NSX-T Data Center micro-segmentation in their vSphere environment to secure a simple application composed of web, app, and database tiers.
The naming convention will be:
* WKS-WEB-SRV-XXX
* WKY-APP-SRR-XXX
* WKI-DB-SRR-XXX
What is the optimal way to group them in order to enforce security policies from NSX-T Data Center?

  • A. Group all by means of tags membership.
  • B. Create an Ethernet based security policy.
  • C. Use Edge as a firewall between tiers.
  • D. Do a service insertion to accomplish the task.

Answer: A

 

NEW QUESTION 51
Which three steps are required to create an IPsec VPN tunnel? (Choose three.)

  • A. Configure a distributed firewall policy.
  • B. Add a logical switch.
  • C. Configure an IPsec session.
  • D. Create an IPsec service.
  • E. Add a local endpoint.

Answer: C,D,E

 

NEW QUESTION 52
When running nsxcli on an ESXi host, which command will show the Replication mode?

  • A. get logical-switch status
  • B. get logical-switch <Local-Switch-UUID> status
  • C. get logical-switches
  • D. get logical-switch <Logical-Switch-UUID>

Answer: D

Explanation:
Explanation
https://vdc-download.vmware.com/vmwb-repository/dcr-public/cc42e3c1-eb34-4567-a916-147e79798957/82646

 

NEW QUESTION 53
......

Download the Latest 2V0-41.20 Dump - 2023 2V0-41.20 Exam Question Bank: https://examcollection.guidetorrent.com/2V0-41.20-dumps-questions.html