Certification objectives change, and stale study material quietly sinks candidates. Every GB0-372-ENU purchase at GuideTorrent includes 365 days of free updates, keeping your 435 practice questions aligned with the H3CSE-RS-SW exam in 2026.
H3C GB0-372-ENU Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Topic 1: Switching Technology Fundamentals | - VLAN and VLAN Routing
|
| Topic 2: H3C Switch Operations and Management | - Switch Management
|
| Topic 3: High Availability Technologies | - Link Aggregation
|
| Topic 4: Layer 3 Switching | - ACL and QoS
|
Frequently Asked Questions About H3CSE-RS-SW
The H3CSE-RS-SW exam (exam code GB0-372-ENU) is the official H3C exam that leads to the H3CSE-Routing & Switching certification, sitting at the Senior level of the H3C certification track. It is also connected with H3CSE-RS (H3C Certified Senior Engineer for Routing & Switching). If this is the credential you are working toward, the 435 practice questions at GuideTorrent map directly to its objectives.
The H3CSE-RS-SW exam includes 50 questions, and you have 90 minutes to complete them. Divide the time limit by the question count and you get a tight average pace per item, so train yourself to flag time-consuming questions and return to them later instead of getting stuck. Before test day, run at least one full timed session in the GuideTorrent test engine under the same limits — the clock should never surprise you.
The passing score for H3CSE-RS-SW is 60%, and the official registration fee is USD 150. A failed attempt means paying that fee in full again, so your preparation budget deserves the same attention as your study plan. A practical rule: book your exam date only after you can finish a GuideTorrent practice test comfortably above the passing score more than once.
According to H3C, candidates should meet the following before registering: H3CNE certification or equivalent knowledge recommended. Requirements can change, so confirm the latest details on the official exam page before you register.
Yes. A free PDF demo of the GB0-372-ENU practice questions is available to download, so you can judge the format and quality before paying anything. Every purchase also includes 365 days of free updates, and if your product expires you can extend the update service at a 50% discount.
Your order is covered by a conditional 100% money-back guarantee: if you take the corresponding exam within 60 days of purchase and do not pass, you may apply for a full refund. Exams taken within 3 days of purchase are not eligible, nor are free materials or expired orders, and the candidate name must match the payer name. To claim, submit a scanned enrollment slip and your official Score Report PDF within 2 days of the exam; claims are processed within 7 days. Prefer to keep studying? You can instead exchange your purchase for two free products of equal value while keeping the update service on your original one. Delivery itself is immediate: your product unlocks for instant download right after payment and a copy is emailed to you within a minute — if nothing arrives within 2 hours, contact our support team. There is no limit on the number of computers you can install it on.
The H3CSE-RS-SW blueprint is divided into 4 major domains, starting with H3C Switch Operations and Management, Switching Technology Fundamentals, and Layer 3 Switching. The full breakdown, including every subdomain and its weighting, is listed in the Exam Topics section above — review it against your own weak areas before scheduling the exam.
H3CSE-RS-SW Sample Questions:
In the switching network shown in the figure, VLAN10 is set as Isolate-user-vlan on switch SWA, VLAN2 and VLAN3 are set as Secondary VLAN of VLAN 10; VLAN4 and VLAN20 are created on switch SWB, and VLAN20 is set as Isolate-user-vlan, and VLAN4 is set as Secondary VLA of VLAN20. After setting the IP addresses of each device as shown in the figure, if the local proxy ARP function is enabled on SWA and SWB, and SWA and SWB are allowed to send ICMP packets, then execute the command tracert 10.1.1.2 on PCA, and PCA will display the jumps required to reach PCB ()
Correct Answer:
2
VLAN 10 has been created on switch SWA. To use one command to add Ethernet 1/0/1, Ethernet
1/0/2, Ethernet 1/0/3, and Ethernet 1/0/5 ports to VLAN 10, which of the following is correct? (Multiple choice)
- A. [SWA-vlan10] port Ethernet 1/0/1 to Ethernet 1/0/3 Ethernet1/0/5
- B. [SWA-vlan10] port from Ethernet 1/0/1 to Ethernet 1/0/3 Ethernet1/0/5
- C. [SWA-vlan10] port Ethernet 1/0/1 to 1/0/3 Ethernet1/0/5
- D. [SWA-vlan10] port Ethernet 1/0/1 Ethernet 1/0/2 Ethernet 1/o/3 Ethernet1/0/5
Correct Answer: A,D 🗳️
Regarding the compatible operation of RSTP and STP, which of the following is correct? (Multiple choice)
- A. When the connection between the RSTP switch and the STP switch is disconnected, the port previously connected to the STP switch will automatically switch back to RSTP mode
- B. When the RSTP switch and the STP switch work together, you need to use the command stpmode stp to switch the working mode of the RSTP switch to STP.
- C. When RSTP switch and STP switch work together, the port connected to the STP switch will switch to STP mode
- D. When a port on an RSTP switch is switched to STP mode, the port will no longer have the fast convergence feature of RSTP.
Correct Answer: C,D 🗳️
Which of the following belongs to the function of the convergence layer?
- A. Access security control
- B. Complex routing strategies
- C. High-speed packet switching
- D. Has a large number of interfaces for connecting to end-user computers
Correct Answer: B 🗳️
In the network shown in the figure, the corresponding configuration is completed on the switch SWA, and the switch SWA and each PC have learned the corresponding ARP.
PCA accesses PCB and sends an ICMP request message. Switch SWA forwards which of the following MAC address to PCB?
- A. MAC_A
- B. MAC10
- C. MAC20
- D. 0000.0000.0000
Correct Answer: C 🗳️
Viewing page 1 out of 87 pages.
Viewing questions 1-5 out of 435 questions.


